To replace an alarm panic button, you first need to unscrew and remove the lid. Please note if a tamper is wired, this will set the alarm off. To silence the alarm, enter your 4 digit code.

Now disconnect wires from device (either 2 or 4 wires depending on whether there’s a tamper circuit wired in).

Finally, unscrew backplate from wall and remove wire. Do the reverse to re-fit.

Still, need help?

If you still need help with your alarm, then get in contact with our team to see if we can help you >>

Or if you know you need an engineer then book an ‘on-site visit’ where one of our trained engineers comes out to your site to fix your problem.  Book an engineer visit here  or email us at help@smartsecurity.support